Kerala Cyber
Warriors
KCW Uploader V1.1
| Path : /usr/bin/X11/ |
|
|
| Current File : //usr/bin/X11/gettextize |
#! /bin/sh
#
# Copyright (C) 1995-1998, 2000-2016 Free Software Foundation, Inc.
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
#
# This file is meant for authors or maintainers which want to
# internationalize their package with the help of GNU gettext. For
# further information how to use it consult the GNU gettext manual.
progname=$0
package=gettext-tools
version=0.19.8.1
archive_version=0.19.8
# Set variables
# - gettext_datadir directory where the data files are stored.
prefix="/usr"
datarootdir="${prefix}/share"
: ${gettext_datadir="${datarootdir}/gettext"}
: ${AUTOM4TE=autom4te}
# func_tmpdir
# creates a temporary directory.
# Sets variable
# - tmp pathname of freshly created temporary directory
func_tmpdir ()
{
# Use the environment variable TMPDIR, falling back to /tmp. This allows
# users to specify a different temporary directory, for example, if their
# /tmp is filled up or too small.
: ${TMPDIR=/tmp}
{
# Use the mktemp program if available. If not available, hide the error
# message.
tmp=`(umask 077 && mktemp -d "$TMPDIR/gtXXXXXX") 2>/dev/null` &&
test -n "$tmp" && test -d "$tmp"
} ||
{
# Use a simple mkdir command. It is guaranteed to fail if the directory
# already exists. $RANDOM is bash specific and expands to empty in shells
# other than bash, ksh and zsh. Its use does not increase security;
# rather, it minimizes the probability of failure in a very cluttered /tmp
# directory.
tmp=$TMPDIR/gt$$-$RANDOM
(umask 077 && mkdir "$tmp")
} ||
{
echo "$0: cannot create a temporary directory in $TMPDIR" >&2
{ (exit 1); exit 1; }
}
}
# Support for relocatability.
func_find_curr_installdir ()
{
# Determine curr_installdir, even taking into account symlinks.
curr_executable="$0"
case "$curr_executable" in
*/* | *\\*) ;;
*) # Need to look in the PATH.
save_IFS="$IFS"; IFS="${PATH_SEPARATOR=':'}"
for dir in $PATH; do
IFS="$save_IFS"
test -z "$dir" && dir=.
for exec_ext in ''; do
if test -f "$dir/$curr_executable$exec_ext"; then
curr_executable="$dir/$curr_executable$exec_ext"
break 2
fi
done
done
IFS="$save_IFS"
;;
esac
# Make absolute.
case "$curr_executable" in
/* | ?:/* | ?:\\*) ;;
*) curr_executable=`pwd`/"$curr_executable" ;;
esac
# Resolve symlinks.
sed_dirname='s,/[^/]*$,,'
sed_linkdest='s,^.* -> \(.*\),\1,p'
while : ; do
lsline=`LC_ALL=C ls -l "$curr_executable"`
case "$lsline" in
*" -> "*)
linkdest=`echo "$lsline" | sed -n -e "$sed_linkdest"`
case "$linkdest" in
/* | ?:/* | ?:\\*) curr_executable="$linkdest" ;;
*) curr_executable=`echo "$curr_executable" | sed -e "$sed_dirname"`/"$linkdest" ;;
esac ;;
*) break ;;
esac
done
curr_installdir=`echo "$curr_executable" | sed -e 's,/[^/]*$,,'`
# Canonicalize.
curr_installdir=`cd "$curr_installdir" && pwd`
}
func_find_prefixes ()
{
# Compute the original/current installation prefixes by stripping the
# trailing directories off the original/current installation directories.
orig_installprefix="$orig_installdir"
curr_installprefix="$curr_installdir"
while true; do
orig_last=`echo "$orig_installprefix" | sed -n -e 's,^.*/\([^/]*\)$,\1,p'`
curr_last=`echo "$curr_installprefix" | sed -n -e 's,^.*/\([^/]*\)$,\1,p'`
if test -z "$orig_last" || test -z "$curr_last"; then
break
fi
if test "$orig_last" != "$curr_last"; then
break
fi
orig_installprefix=`echo "$orig_installprefix" | sed -e 's,/[^/]*$,,'`
curr_installprefix=`echo "$curr_installprefix" | sed -e 's,/[^/]*$,,'`
done
}
if test "no" = yes; then
exec_prefix="${prefix}"
bindir="${exec_prefix}/bin"
orig_installdir="$bindir" # see Makefile.am's *_SCRIPTS variables
func_find_curr_installdir # determine curr_installdir
func_find_prefixes
# Relocate the directory variables that we use.
gettext_datadir=`echo "$gettext_datadir/" | sed -e "s%^${orig_installprefix}/%${curr_installprefix}/%" | sed -e 's,/$,,'`
fi
# func_trace_autoconf macro configure.ac
# traces an Autoconf macro call and outputs the arguments to stdout,
# using autom4te.
func_trace_autoconf ()
{
echo '\
dnl replace macros which may abort autom4te with a no-op variant
m4_pushdef([m4_assert])
m4_pushdef([m4_fatal])
m4_pushdef([m4_warn])
m4_pushdef([m4_errprintn])
m4_pushdef([m4_exit])
m4_pushdef([m4_include])
m4_pushdef([m4_esyscmd])
' \
| "$AUTOM4TE" --no-cache --language=Autoconf-without-aclocal-m4 \
--trace="$1":\$% - "$2" 2>/dev/null
}
# func_trace_sed macro configure.ac
# traces an Autoconf macro call and outputs the arguments to stdout,
# using sed.
func_trace_sed ()
{
sed_extract_arguments='
s,#.*$,,; s,^dnl .*$,,; s, dnl .*$,,;
/'"$1"'(/ {
ta
:a
s/)/)/
tb
s/\\$//
N
ba
:b
s,^.*'"$1"'([[ ]*\([^]"$`\\)]*\).*$,\1,p
}
d'
sed -e "$sed_extract_arguments" "$2"
}
# func_usage
# outputs to stdout the --help usage message.
func_usage ()
{
echo "\
Usage: gettextize [OPTION]... [package-dir]
Prepares a source package to use gettext.
Options:
--help print this help and exit
--version print version information and exit
-f, --force force writing of new files even if old exist
--intl install libintl in a subdirectory (deprecated)
--po-dir=DIR specify directory with PO files
--no-changelog don't update or create ChangeLog files
--symlink make symbolic links instead of copying files
-n, --dry-run print modifications but don't perform them
Report bugs to <bug-gnu-gettext@gnu.org>."
}
# func_version
# outputs to stdout the --version message.
func_version ()
{
echo "$progname (GNU $package) $version"
echo "Copyright (C) 1995-1998, 2000-2013 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law."
echo "Written by" "Ulrich Drepper"
}
# func_fatal_error message
# outputs to stderr a fatal error message, and terminates the program.
func_fatal_error ()
{
echo "gettextize: *** $1" 1>&2
echo "gettextize: *** Stop." 1>&2
exit 1
}
# Nuisances.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
# Unset more variables known to interfere with behavior of common tools.
CLICOLOR_FORCE= GREP_OPTIONS=
unset CLICOLOR_FORCE GREP_OPTIONS
# Command-line option processing.
# Removes the OPTIONS from the arguments. Sets the variables:
# - force 1 if --force was given, 0 otherwise
# - intldir yes if --intl was given, empty otherwise
# - podirs list of directories specified with --po-dir
# - try_ln_s : if --symlink was given, false otherwise
# - do_changelog false if --no-changelog was given, : otherwise
# - doit false if --dry-run was given, : otherwise
{
force=0
intldir=
podirs=
try_ln_s=false
do_changelog=:
doit=:
while test $# -gt 0; do
case "$1" in
-c | --copy | --cop | --co | --c ) # accepted for backward compatibility
shift ;;
-n | --dry-run | --dry-ru | --dry-r | --dry- | --dry | --dr | --d )
shift
doit=false ;;
-f | --force | --forc | --for | --fo | --f )
shift
force=1 ;;
--help | --hel | --he | --h )
func_usage; exit 0 ;;
--intl | --int | --in | --i )
shift
intldir=yes ;;
--po-dir | --po-di | --po-d | --po- | --po | --p )
shift
if test $# = 0; then
func_fatal_error "missing argument for --po-dir"
fi
case "$1" in
-*) func_fatal_error "missing argument for --po-dir" ;;
esac
podirs="$podirs $1"
shift ;;
--po-dir=* )
arg=`echo "X$1" | sed -e 's/^X--po-dir=//'`
podirs="$podirs $arg"
shift ;;
--no-changelog | --no-changelo | --no-changel | --no-change | --no-chang | --no-chan | --no-cha | --no-ch | --no-c )
shift
do_changelog=false ;;
--symlink | --symlin | --symli | --syml | --sym | --sy | --s )
shift
try_ln_s=: ;;
--version | --versio | --versi | --vers | --ver | --ve | --v )
func_version
exit 0 ;;
-- ) # Stop option prcessing
shift; break ;;
-* )
echo "gettextize: unknown option $1" 1>&2
echo "Try 'gettextize --help' for more information." 1>&2
exit 1 ;;
* )
break ;;
esac
done
# podirs defaults to "po".
test -n "$podirs" || podirs="po"
}
# Warn about deprecated options.
if test -n "$intldir"; then
echo "gettextize: warning: the option '--intl' is deprecated and will be removed" 1>&2
fi
# Command-line argument processing.
# Analyzes the remaining arguments.
# Sets the variables
# - origdir to the original directory,
# - srcdir to the package directory, and cd-s into it.
{
if test $# -gt 1; then
func_usage 1>&2
exit 1
fi
origdir=`pwd`
if test $# -eq 1; then
srcdir=$1
if cd "$srcdir"; then
srcdir=`pwd`
else
func_fatal_error "Cannot change directory to '$srcdir'."
fi
else
srcdir=$origdir
fi
}
# The current directory is now $srcdir.
# Check integrity of package: A configure.in/ac must be present. Sets variable
# - configure_in name of configure.in/ac file.
test -f configure.in || test -f configure.ac ||
func_fatal_error "Missing configure.in or configure.ac, please cd to your package first."
configure_in=NONE
if test -f configure.in; then
configure_in=configure.in
else
if test -f configure.ac; then
configure_in=configure.ac
fi
fi
# Check whether the --force option is needed but has not been specified.
if test $force -eq 0; then
if test -d intl; then
func_fatal_error "intl/ subdirectory exists: use option -f if you really want to delete it."
fi
for podir in $podirs; do
if test -f "$podir/Makefile.in.in"; then
func_fatal_error "$podir/Makefile.in.in exists: use option -f if you really want to delete it."
fi
done
if test -f ABOUT-NLS; then
func_fatal_error "ABOUT-NLS exists: use option -f if you really want to delete it."
fi
fi
# Select the method for Autoconf macro tracing. func_trace_autoconf
# is more accurate than func_trace_sed, but it only works with
# autoconf >= 2.69.
if echo "AC_PREREQ([2.69])" \
| "$AUTOM4TE" --no-cache --language=Autoconf-without-aclocal-m4 - 2>&1; then
func_trace=func_trace_autoconf
else
func_trace=func_trace_sed
fi
# Check in which directory config.rpath etc. belong.
auxdir=`"$func_trace" AC_CONFIG_AUX_DIR "$configure_in"`
if test -n "$auxdir"; then
auxdir="$auxdir/"
fi
# Check in which directory gettext.m4 etc. belong.
macrodirs=`"$func_trace" AC_CONFIG_MACRO_DIR_TRACE "$configure_in"`
if test -z "$macrodirs"; then
macrodirs=`"$func_trace" AC_CONFIG_MACRO_DIR "$configure_in"`
fi
for arg in $macrodirs; do
m4dir="$arg"
break
done
# For simplicity we change to the gettext source directory.
cd "$gettext_datadir" ||
func_fatal_error "gettext source directory '${gettext_datadir}' doesn't exist"
# Variables which keep track what has been modified.
added_directories=
removed_directory=
added_extradist=
added_acoutput=
removed_acoutput=" intl/intlh.inst"
# Variable:
# - please accumulates instructions for the user.
please=
# Variable:
# - date current date, for use in ChangeLog entries.
date=`date +%Y-%m-%d`
# func_copy from to
# copies a file.
# 'from' is a relative pathname, relative to the current directory.
# 'to' is a relative pathname, relative to $srcdir.
func_copy ()
{
if $doit; then
rm -f "$srcdir/$2"
echo "Copying file $2"
cp "$1" "$srcdir/$2"
else
echo "Copy file $2"
fi
}
# func_linkorcopy from absfrom to
# links or copies a file.
# 'from' is a relative pathname, relative to the current directory.
# 'absfrom' is the corresponding absolute pathname.
# 'to' is a relative pathname, relative to $srcdir.
func_linkorcopy ()
{
if $doit; then
rm -f "$srcdir/$3"
($try_ln_s && ln -s "$2" "$srcdir/$3" && echo "Symlinking file $3") 2>/dev/null ||
{ echo "Copying file $3"; cp "$1" "$srcdir/$3"; }
else
if $try_ln_s; then
echo "Symlink file $3"
else
echo "Copy file $3"
fi
fi
}
# func_backup to
# makes a backup of a file that is about to be overwritten or replaced.
# 'to' is a relative pathname, relative to $srcdir.
func_backup ()
{
if $doit; then
if test -f "$srcdir/$1"; then
rm -f "$srcdir/$1~"
cp -p "$srcdir/$1" "$srcdir/$1~"
fi
fi
}
# func_remove to
# removes a file.
# 'to' is a relative pathname, relative to $srcdir.
func_remove ()
{
if $doit; then
echo "Removing $1"
rm -f "$srcdir/$1"
else
echo "Remove $1"
fi
}
# func_ChangeLog_init
# func_ChangeLog_add_entry line
# func_ChangeLog_finish
# manage the ChangeLog file, relative to $srcdir.
func_ChangeLog_init ()
{
modified_ChangeLog=
}
func_ChangeLog_add_entry ()
{
if $doit; then
if test -z "$modified_ChangeLog"; then
echo "$date gettextize <bug-gnu-gettext@gnu.org>" > "$srcdir/ChangeLog.tmp"
echo >> "$srcdir/ChangeLog.tmp"
modified_ChangeLog=yes
fi
echo "$1" >> "$srcdir/ChangeLog.tmp"
else
modified_ChangeLog=yes
fi
}
func_ChangeLog_finish ()
{
if test -n "$modified_ChangeLog"; then
if $doit; then
echo >> "$srcdir/ChangeLog.tmp"
if test -f "$srcdir/ChangeLog"; then
echo "Adding an entry to ChangeLog (backup is in ChangeLog~)"
cat "$srcdir/ChangeLog" >> "$srcdir/ChangeLog.tmp"
rm -f "$srcdir/ChangeLog~"
cp -p "$srcdir/ChangeLog" "$srcdir/ChangeLog~"
else
echo "Creating ChangeLog"
fi
cp "$srcdir/ChangeLog.tmp" "$srcdir/ChangeLog"
rm -f "$srcdir/ChangeLog.tmp"
else
if test -f "$srcdir/ChangeLog"; then
echo "Add an entry to ChangeLog"
else
echo "Create ChangeLog"
fi
fi
fi
}
# func_poChangeLog_init
# func_poChangeLog_add_entry line
# func_poChangeLog_finish
# manage the $podir/ChangeLog file, relative to $srcdir.
func_poChangeLog_init ()
{
modified_poChangeLog=
}
func_poChangeLog_add_entry ()
{
if $doit; then
if test -z "$modified_poChangeLog"; then
echo "$date gettextize <bug-gnu-gettext@gnu.org>" > "$srcdir/$podir/ChangeLog.tmp"
echo >> "$srcdir/$podir/ChangeLog.tmp"
modified_poChangeLog=yes
fi
echo "$1" >> "$srcdir/$podir/ChangeLog.tmp"
else
modified_poChangeLog=yes
fi
}
func_poChangeLog_finish ()
{
if test -n "$modified_poChangeLog"; then
if $doit; then
echo >> "$srcdir/$podir/ChangeLog.tmp"
if test -f "$srcdir/$podir/ChangeLog"; then
echo "Adding an entry to $podir/ChangeLog (backup is in $podir/ChangeLog~)"
cat "$srcdir/$podir/ChangeLog" >> "$srcdir/$podir/ChangeLog.tmp"
rm -f "$srcdir/$podir/ChangeLog~"
cp -p "$srcdir/$podir/ChangeLog" "$srcdir/$podir/ChangeLog~"
else
echo "Creating $podir/ChangeLog"
fi
cp "$srcdir/$podir/ChangeLog.tmp" "$srcdir/$podir/ChangeLog"
rm -f "$srcdir/$podir/ChangeLog.tmp"
else
if test -f "$srcdir/$podir/ChangeLog"; then
echo "Add an entry to $podir/ChangeLog"
else
echo "Create $podir/ChangeLog"
fi
fi
fi
}
# func_m4ChangeLog_init
# func_m4ChangeLog_add_entry line
# func_m4ChangeLog_finish
# manage the $m4dir/ChangeLog file, relative to $srcdir.
func_m4ChangeLog_init ()
{
if test -n "$using_m4ChangeLog"; then
modified_m4ChangeLog=
created_m4ChangeLog=
fi
}
func_m4ChangeLog_add_entry ()
{
if test -n "$using_m4ChangeLog"; then
if $doit; then
if test -z "$modified_m4ChangeLog"; then
echo "$date gettextize <bug-gnu-gettext@gnu.org>" > "$srcdir/$m4dir/ChangeLog.tmp"
echo >> "$srcdir/$m4dir/ChangeLog.tmp"
modified_m4ChangeLog=yes
fi
echo "$1" >> "$srcdir/$m4dir/ChangeLog.tmp"
else
modified_m4ChangeLog=yes
fi
else
line="$1"
line=`echo "$line" | sed -e "s%^ \\* % * $m4dir/%"`
func_ChangeLog_add_entry "$line"
fi
}
func_m4ChangeLog_finish ()
{
if test -n "$using_m4ChangeLog"; then
if test -n "$modified_m4ChangeLog"; then
if $doit; then
echo >> "$srcdir/$m4dir/ChangeLog.tmp"
if test -f "$srcdir/$m4dir/ChangeLog"; then
echo "Adding an entry to $m4dir/ChangeLog (backup is in $m4dir/ChangeLog~)"
cat "$srcdir/$m4dir/ChangeLog" >> "$srcdir/$m4dir/ChangeLog.tmp"
rm -f "$srcdir/$m4dir/ChangeLog~"
cp -p "$srcdir/$m4dir/ChangeLog" "$srcdir/$m4dir/ChangeLog~"
else
echo "Creating $m4dir/ChangeLog"
created_m4ChangeLog=yes
fi
cp "$srcdir/$m4dir/ChangeLog.tmp" "$srcdir/$m4dir/ChangeLog"
rm -f "$srcdir/$m4dir/ChangeLog.tmp"
else
if test -f "$srcdir/$m4dir/ChangeLog"; then
echo "Add an entry to $m4dir/ChangeLog"
else
echo "Create $m4dir/ChangeLog"
created_m4ChangeLog=yes
fi
fi
fi
fi
}
using_m4ChangeLog=yes
if test ! -f "$srcdir/intl/Makefile.in" && test -n "$intldir"; then
added_acoutput="$added_acoutput intl/Makefile"
fi
if test -f "$srcdir/intl/Makefile.in" && test -z "$intldir"; then
removed_acoutput="$removed_acoutput intl/Makefile"
fi
if test -d "$srcdir/intl"; then
# Remove everything inside intl except for RCS and CVS subdirs and invisible
# files.
if $doit; then
echo "Wiping out intl/ subdirectory"
(cd "$srcdir/intl" &&
for f in *; do
if test CVS != "$f" && test RCS != "$f"; then
rm -rf "$f"
fi
done)
else
echo "Wipe out intl/ subdirectory"
fi
if test -z "$intldir"; then
removed_directory=intl
fi
else
if test -n "$intldir"; then
if $doit; then
echo "Creating intl/ subdirectory"
mkdir "$srcdir/intl" || func_fatal_error "failed to create intl/ subdirectory"
else
echo "Create intl/ subdirectory"
fi
added_directories="$added_directories intl"
fi
fi
$do_changelog && func_ChangeLog_init
for podir in $podirs; do
test -d "$srcdir/$podir" || {
if $doit; then
echo "Creating $podir/ subdirectory"
mkdir "$srcdir/$podir" || func_fatal_error "failed to create $podir/ subdirectory"
else
echo "Create $podir/ subdirectory"
fi
added_directories="$added_directories $podir"
}
done
# Create the directory for config.rpath, if needed.
# This is for consistency with autoreconf and automake.
# Note that $auxdir is either empty or ends in a slash.
test -d "$srcdir/$auxdir" || {
if $doit; then
echo "Creating $auxdir subdirectory"
mkdir "$srcdir/$auxdir" || func_fatal_error "failed to create $auxdir subdirectory"
else
echo "Create $auxdir subdirectory"
fi
}
# Now copy all files. Take care for the destination directories.
for file in *; do
case $file in
ABOUT-NLS)
func_linkorcopy $file "$gettext_datadir/$file" $file
;;
config.rpath)
if test -f "$srcdir/$auxdir$file"; then
:
else
added_extradist="$added_extradist $auxdir$file"
fi
func_linkorcopy $file "$gettext_datadir/$file" "$auxdir$file"
;;
esac
done
# Copy files to intl/ subdirectory.
if test -n "$intldir"; then
cd intl
for file in *; do
if test $file != COPYING.LIB-2.0 && test $file != COPYING.LIB-2.1; then
if test $file != plural.c; then
func_linkorcopy $file "$gettext_datadir/intl/$file" intl/$file
else
# plural.c is a generated file; it must be copied and touched.
func_copy $file intl/$file
if $doit; then
(sleep 2; touch "$srcdir/intl/$file") &
fi
fi
fi
done
cd ..
else
echo "Not copying intl/ directory."
# Tell the user what to put into configure.ac, if it is not already there.
external=
# Need to use func_trace_sed instead of $func_trace, since
# AM_GNU_GETTEXT is not a standard Autoconf trace.
xargs=`func_trace_sed AM_GNU_GETTEXT "$srcdir/$configure_in"`
save_IFS="$IFS"; IFS=:
for arg in $xargs; do
if test 'external' = "$arg"; then
external=yes
break
fi
done
IFS="$save_IFS"
if test -z "$external"; then
please="$please
Please use AM_GNU_GETTEXT([external]) in order to cause autoconfiguration
to look for an external libintl.
"
fi
fi
# Copy files to po/ subdirectory.
cd po
for podir in $podirs; do
$do_changelog && func_poChangeLog_init
for file in Makefile.in.in; do
same=no
if test -f "$srcdir/$podir/$file"; then
if cmp -s $file "$srcdir/$podir/$file"; then
same=yes
fi
else
added_acoutput="$added_acoutput $podir/Makefile.in"
fi
if $do_changelog && test $same = no; then
if test -f "$srcdir/$podir/$file"; then
func_poChangeLog_add_entry " * $file: Upgrade to gettext-${version}."
else
func_poChangeLog_add_entry " * $file: New file, from gettext-${version}."
fi
fi
func_backup "$podir/$file"
func_linkorcopy $file "$gettext_datadir/po/$file" "$podir/$file"
done
for file in *; do
case $file in
Makefile.in.in)
# Already handled above.
;;
Makevars.template)
func_linkorcopy Makevars.template "$gettext_datadir/po/Makevars.template" "$podir/Makevars.template"
if test -f "$srcdir/po/Makevars"; then
LC_ALL=C sed -n -e 's/[ ]*\([A-Za-z0-9_]*\)[ ]*=.*/\1/p' < "$srcdir/$podir/Makevars" | LC_ALL=C sort > "$srcdir/$podir/Makevars.tmp1"
LC_ALL=C sed -n -e 's/[ ]*\([A-Za-z0-9_]*\)[ ]*=.*/\1/p' < "$srcdir/$podir/Makevars.template" | LC_ALL=C sort > "$srcdir/$podir/Makevars.tmp2"
missingvars=`LC_ALL=C comm -13 "$srcdir/$podir/Makevars.tmp1" "$srcdir/$podir/Makevars.tmp2"`
rm -f "$srcdir/$podir/Makevars.tmp1" "$srcdir/$podir/Makevars.tmp2"
if test -n "$missingvars"; then
please="$please
Please update $podir/Makevars so that it defines all the variables mentioned
in $podir/Makevars.template.
You can then remove $podir/Makevars.template.
"
fi
else
please="$please
Please create $podir/Makevars from the template in $podir/Makevars.template.
You can then remove $podir/Makevars.template.
"
fi
;;
*)
same=no
if test -f "$srcdir/$podir/$file"; then
if cmp -s $file "$srcdir/$podir/$file"; then
same=yes
fi
fi
if $do_changelog && test $same = no; then
if test -f "$srcdir/$podir/$file"; then
func_poChangeLog_add_entry " * $file: Upgrade to gettext-${version}."
else
func_poChangeLog_add_entry " * $file: New file, from gettext-${version}."
fi
fi
func_backup "$podir/$file"
func_linkorcopy $file "$gettext_datadir/po/$file" "$podir/$file"
;;
esac
done
if test -f "$srcdir/$podir/cat-id-tbl.c"; then
func_remove "$podir/cat-id-tbl.c"
$do_changelog && func_poChangeLog_add_entry " * cat-id-tbl.c: Remove file."
fi
if test -f "$srcdir/$podir/stamp-cat-id"; then
func_remove "$podir/stamp-cat-id"
$do_changelog && func_poChangeLog_add_entry " * stamp-cat-id: Remove file."
fi
if test ! -f "$srcdir/$podir/POTFILES.in"; then
if $doit; then
echo "Creating initial $podir/POTFILES.in"
echo '# List of source files which contain translatable strings.' > "$srcdir/$podir/POTFILES.in"
else
echo "Create initial $podir/POTFILES.in"
fi
$do_changelog && func_poChangeLog_add_entry " * POTFILES.in: New file."
please="$please
Please fill $podir/POTFILES.in as described in the documentation.
"
fi
$do_changelog && func_poChangeLog_finish
done
# Determine whether we can assume automake 1.9 or newer.
have_automake19=
if (aclocal --version) >/dev/null 2>/dev/null; then
aclocal_version=`aclocal --version | sed -n -e 1p | sed -e 's/^[^0-9]*//'`
case $aclocal_version in
1.9* | 1.[1-9][0-9]* | [2-9]*) have_automake19=yes ;;
esac
fi
m4filelist='gettext.m4 iconv.m4 lib-ld.m4 lib-link.m4 lib-prefix.m4 nls.m4
po.m4 progtest.m4'
# With aclocal versions < 1.9 we need all m4 files, otherwise "aclocal -I m4"
# might give an error. (aclocal < 1.9 didn't know which macros are really
# needed, it looked which macros are potentially needed.)
min_automake_version=1.9
if test -n "$intldir" || test -z "$have_automake19"; then
# Add intldir.m4, intl.m4 and its dependencies.
m4filelist=$m4filelist' codeset.m4 fcntl-o.m4 glibc2.m4 glibc21.m4 intdiv0.m4
intl.m4 intldir.m4 intlmacosx.m4 intmax.m4 inttypes_h.m4 inttypes-pri.m4
lcmessage.m4 lock.m4 longlong.m4 printf-posix.m4 size_max.m4 stdint_h.m4
threadlib.m4 uintmax_t.m4 visibility.m4 wchar_t.m4 wint_t.m4 xsize.m4'
min_automake_version=1.8
fi
# All sorts of bugs could occur if the configure file was remade with the wrong
# version of gettext.m4 et al. (because then the configure and the po/Makefile.in.in
# don't fit together). It is therefore important that the package carries the
# right versions of gettext.m4 et al. with it.
if test -f "$srcdir/Makefile.am"; then
# A package using automake.
# Determine whether it's using automake 1.8 or newer.
have_automake18=
if (aclocal --version) >/dev/null 2>/dev/null; then
aclocal_version=`aclocal --version | sed -n -e 1p | sed -e 's/^[^0-9]*//'`
case $aclocal_version in
1.[8-9]* | 1.[1-9][0-9]* | [2-9]*) have_automake18=yes ;;
esac
fi
if test -z "$m4dir"; then
# Extract the macro directory name from Makefile.am.
aclocal_amflags=`grep '^ACLOCAL_AMFLAGS[ ]*=' "$srcdir/Makefile.am" | sed -e 's/^ACLOCAL_AMFLAGS[ ]*=\(.*\)$/\1/'`
m4dir_is_next=
for arg in $aclocal_amflags; do
if test -n "$m4dir_is_next"; then
# Ignore absolute directory pathnames, like /usr/local/share/aclocal.
case "$arg" in
/*) ;;
*)
test -z "$m4dir" || m4dir="$arg"
macrodirs="$macrodirs $arg"
;;
esac
m4dir_is_next=
else
if test "X$arg" = "X-I"; then
m4dir_is_next=yes
else
m4dir_is_next=
fi
fi
done
for arg in $macrodirs; do
m4dir="$arg"
break
done
fi
if test -z "$m4dir"; then
m4dir=m4
m4dir_defaulted=yes
fi
# Decide whether to use $m4dir/ChangeLog, or to use ChangeLog instead.
if test -d "$srcdir/$m4dir" && test -f "$srcdir/ChangeLog" && test ! -f "$srcdir/$m4dir/ChangeLog"; then
# The programmer has no $m4dir/ChangeLog so far. Don't introduce one.
using_m4ChangeLog=
fi
# Update the *.m4 files and the corresponding Makefile.am.
$do_changelog && func_m4ChangeLog_init
added_m4dir=
added_m4files=
if test -d "$srcdir/$m4dir"; then
:
else
if $doit; then
echo "Creating directory $m4dir"
mkdir "$srcdir/$m4dir"
else
echo "Create directory $m4dir"
fi
added_m4dir=yes
fi
for file in $m4filelist; do
same=no
if test -f "$srcdir/$m4dir/$file"; then
if cmp -s "${datarootdir}/aclocal/$file" "$srcdir/$m4dir/$file"; then
same=yes
fi
else
added_m4files="$added_m4files $file"
fi
if $do_changelog && test $same = no; then
if test -f "$srcdir/$m4dir/$file"; then
func_m4ChangeLog_add_entry " * $file: Upgrade to gettext-${version}."
else
func_m4ChangeLog_add_entry " * $file: New file, from gettext-${version}."
fi
fi
func_backup "$m4dir/$file"
func_linkorcopy "${datarootdir}/aclocal/$file" "${datarootdir}/aclocal/$file" "$m4dir/$file"
done
missing_m4Makefileam=
if test -n "$added_m4files"; then
if test -f "$srcdir/$m4dir/Makefile.am"; then
if $doit; then
echo "Updating EXTRA_DIST in $m4dir/Makefile.am (backup is in $m4dir/Makefile.am~)"
func_backup "$m4dir/Makefile.am"
rm -f "$srcdir/$m4dir/Makefile.am"
if grep '^EXTRA_DIST[ ]*=' "$srcdir/$m4dir/Makefile.am~" > /dev/null; then
sed -e "s%^\(EXTRA_DIST[ ]*=\) \\?%\\1$added_m4files %" < "$srcdir/$m4dir/Makefile.am~" > "$srcdir/$m4dir/Makefile.am"
$do_changelog && func_m4ChangeLog_add_entry " * Makefile.am (EXTRA_DIST): Add the new files."
else
(cat "$srcdir/$m4dir/Makefile.am~"; echo; echo "EXTRA_DIST =$added_m4files") > "$srcdir/$m4dir/Makefile.am"
$do_changelog && func_m4ChangeLog_add_entry " * Makefile.am (EXTRA_DIST): New variable."
fi
else
echo "Update EXTRA_DIST in $m4dir/Makefile.am"
$do_changelog && func_m4ChangeLog_add_entry " * Makefile.am (EXTRA_DIST)."
fi
else
# $m4dir/Makefile.am is not needed any more when aclocal 1.8 or newer
# is used.
if test -z "$have_automake18"; then
if $doit; then
echo "Creating $m4dir/Makefile.am"
echo "EXTRA_DIST =$added_m4files" > "$srcdir/$m4dir/Makefile.am"
else
echo "Create $m4dir/Makefile.am"
fi
$do_changelog && func_m4ChangeLog_add_entry " * Makefile.am: New file."
added_acoutput="$added_acoutput $m4dir/Makefile"
else
missing_m4Makefileam=yes
fi
fi
fi
if test -n "$added_m4dir" && test -z "$missing_m4Makefileam"; then
added_directories="$added_directories $m4dir"
fi
$do_changelog && func_m4ChangeLog_finish
# automake will arrange for $m4dir/ChangeLog to be distributed if a
# $m4dir/Makefile.am exists. If not, we need to add it to Makefile.am's
# EXTRA_DIST explicitly.
if test -n "$created_m4ChangeLog" && test -n "$missing_m4Makefileam"; then
added_extradist="$added_extradist $m4dir/ChangeLog"
fi
# Update the top-level Makefile.am.
modified_Makefile_am=
# func_modify_Makefile_am changelog_comment
# assumes a modified copy of $srcdir/Makefile.am in $srcdir/Makefile.am.tmp
# and replaces the original Makefile.am file with the modified one if
# the two files differ. Then it removes the modified copy.
func_modify_Makefile_am ()
{
if cmp -s "$srcdir/Makefile.am" "$srcdir/Makefile.am.tmp"; then
:
else
if test -z "$modified_Makefile_am"; then
if $doit; then
echo "Updating Makefile.am (backup is in Makefile.am~)"
func_backup Makefile.am
else
echo "Update Makefile.am"
fi
fi
if $doit; then
rm -f "$srcdir/Makefile.am"
cp "$srcdir/Makefile.am.tmp" "$srcdir/Makefile.am"
fi
if $do_changelog; then
if test -z "$modified_Makefile_am"; then
func_ChangeLog_add_entry " * Makefile.am $1"
else
func_ChangeLog_add_entry " $1"
fi
fi
modified_Makefile_am=yes
fi
rm -f "$srcdir/Makefile.am.tmp"
}
if test -n "$added_directories"; then
if grep '^SUBDIRS[ ]*=' "$srcdir/Makefile.am" > /dev/null; then
sed -e "s%^\(SUBDIRS[ ]*=\) \\?%\\1$added_directories %" < "$srcdir/Makefile.am" > "$srcdir/Makefile.am.tmp"
added_directories_pretty=`echo $added_directories | sed -e 's/ /, /g'`
func_modify_Makefile_am "(SUBDIRS): Add $added_directories_pretty."
else
(cat "$srcdir/Makefile.am"; echo; echo "SUBDIRS =$added_directories") > "$srcdir/Makefile.am.tmp"
func_modify_Makefile_am "(SUBDIRS): New variable."
fi
fi
if test -n "$removed_directory"; then
sed -e '/^SUBDIRS[ ]*=/ {
:a
s%\([ ]\)'"$removed_directory"'[ ]%\1%
s%[ ]'"$removed_directory"'$%%
tb
:b
s%\\$%\\%
tc
bd
:c
n
ba
:d
}' < "$srcdir/Makefile.am" > "$srcdir/Makefile.am.tmp"
func_modify_Makefile_am "(SUBDIRS): Remove $removed_directory."
fi
if test -n "$added_directories"; then
if grep '^DIST_SUBDIRS[ ]*=' "$srcdir/Makefile.am" > /dev/null; then
sed -e "s%^\(DIST_SUBDIRS[ ]*=\) \\?%\\1$added_directories %" < "$srcdir/Makefile.am" > "$srcdir/Makefile.am.tmp"
added_directories_pretty=`echo $added_directories | sed -e 's/ /, /g'`
func_modify_Makefile_am "(DIST_SUBDIRS): Add $added_directories_pretty."
fi
fi
if test -n "$removed_directory"; then
sed -e '/^DIST_SUBDIRS[ ]*=/ {
:a
s%\([ ]\)'"$removed_directory"'[ ]%\1%
s%[ ]'"$removed_directory"'$%%
tb
:b
s%\\$%\\%
tc
bd
:c
n
ba
:d
}' < "$srcdir/Makefile.am" > "$srcdir/Makefile.am.tmp"
func_modify_Makefile_am "(DIST_SUBDIRS): Remove $removed_directory."
fi
if test -n "$m4dir_defaulted"; then
if grep '^ACLOCAL_AMFLAGS[ ]*=' "$srcdir/Makefile.am" > /dev/null; then
sed -e "s%^\(ACLOCAL_AMFLAGS[ ]*=\) \\?%\\1 -I $m4dir %" < "$srcdir/Makefile.am" > "$srcdir/Makefile.am.tmp"
func_modify_Makefile_am "(ACLOCAL_AMFLAGS): Add -I $m4dir."
else
(cat "$srcdir/Makefile.am"; echo; echo "ACLOCAL_AMFLAGS = -I $m4dir") > "$srcdir/Makefile.am.tmp"
func_modify_Makefile_am "(ACLOCAL_AMFLAGS): New variable."
fi
# Also update Makefile.in and, if existent, Makefile. Otherwise they
# would take into account the new flags only after a few rounds of
# "./configure", "make", "touch configure.in", "make distclean".
if $doit; then
for file in Makefile.in Makefile; do
if test -f "$srcdir/$file"; then
func_backup $file
rm -f "$srcdir/$file"
sed -e "s%(ACLOCAL)%(ACLOCAL) -I $m4dir%" < "$srcdir/$file~" > "$srcdir/$file"
fi
done
fi
fi
if test -n "$added_extradist"; then
if grep '^EXTRA_DIST[ ]*=' "$srcdir/Makefile.am" > /dev/null; then
sed -e "s%^\(EXTRA_DIST[ ]*=\)%\\1$added_extradist %" < "$srcdir/Makefile.am" > "$srcdir/Makefile.am.tmp"
added_extradist_pretty=`echo $added_extradist | sed -e 's/ /, /g'`
func_modify_Makefile_am "(EXTRA_DIST): Add $added_extradist_pretty."
else
(cat "$srcdir/Makefile.am"; echo; echo "EXTRA_DIST =$added_extradist") > "$srcdir/Makefile.am.tmp"
func_modify_Makefile_am "(EXTRA_DIST): New variable."
fi
fi
# Extract the aclocal options name from Makefile.am.
aclocal_options=
for arg in $macrodirs; do
aclocal_options="$aclocal_options -I $arg"
done
please="$please
Please run 'aclocal$aclocal_options' to regenerate the aclocal.m4 file.
You need aclocal from GNU automake $min_automake_version (or newer) to do this.
Then run 'autoconf' to regenerate the configure file.
"
# Also create $m4dir/Makefile.in from $m4dir/Makefile.am, because automake
# doesn't do it by itself.
if $doit; then
case "$added_acoutput" in
*" $m4dir/Makefile")
(cd "$srcdir" && automake "$m4dir/Makefile") 2>/dev/null ||
please="$please
Please run 'automake $m4dir/Makefile' to create $m4dir/Makefile.in
"
;;
esac
fi
else
please="$please
Please add the files
$m4filelist
from the ${datarootdir}/aclocal directory to your aclocal.m4 file.
"
fi
modified_configure_in=
# func_modify_configure_in changelog_comment
# assumes a modified copy of $srcdir/$configure_in in $srcdir/$configure_in.tmp
# and replaces the original configure.in/ac file with the modified one if
# the two files differ. Then it removes the modified copy.
func_modify_configure_in ()
{
if cmp -s "$srcdir/$configure_in" "$srcdir/$configure_in.tmp"; then
:
else
if test -z "$modified_configure_in"; then
if $doit; then
echo "Updating $configure_in (backup is in $configure_in~)"
func_backup $configure_in
else
echo "Update $configure_in"
fi
fi
if $doit; then
rm -f "$srcdir/$configure_in"
cp "$srcdir/$configure_in.tmp" "$srcdir/$configure_in"
fi
if $do_changelog; then
if test -z "$modified_configure_in"; then
func_ChangeLog_add_entry " * $configure_in $1"
else
func_ChangeLog_add_entry " $1"
fi
fi
modified_configure_in=yes
fi
rm -f "$srcdir/$configure_in.tmp"
}
if test -n "$added_acoutput"; then
if grep '^AC_CONFIG_FILES(' "$srcdir/$configure_in" > /dev/null; then
sedprog='
ta
b
:a
n
ba'
sed -e "s%^\\(AC_CONFIG_FILES([^])\\,]*\\)%\\1$added_acoutput%$sedprog" < "$srcdir/$configure_in" > "$srcdir/$configure_in.tmp"
added_acoutput_pretty=`echo $added_acoutput | sed -e 's/ /, /g'`
func_modify_configure_in "(AC_CONFIG_FILES): Add $added_acoutput_pretty."
else
if grep '^AC_OUTPUT(' "$srcdir/$configure_in" > /dev/null; then
sed -e "s%^\\(AC_OUTPUT([^])\\,]*\\)%\\1$added_acoutput%" < "$srcdir/$configure_in" > "$srcdir/$configure_in.tmp"
added_acoutput_pretty=`echo $added_acoutput | sed -e 's/ /, /g'`
func_modify_configure_in "(AC_OUTPUT): Add $added_acoutput_pretty."
else
please="$please
Please add$added_acoutput to the AC_OUTPUT or AC_CONFIG_FILES invocation in the $configure_in file.
"
fi
fi
fi
if test -n "$removed_acoutput"; then
for file in $removed_acoutput; do
tag=
sedprog='{
s%\([[ ]\)'"$file"'[ ]%\1%
s%\([[ ]\)'"$file"'\([]),]\)%\1\2%
s%[[ ]'"$file"'$%%
:a
tb
:b
s%\\$%\\%
tc
bd
:c
n
s%\([ ]\)'"$file"'[ ]%\1%
s%\([ ]\)'"$file"'\([]),]\)%\1\2%
s%[ ]'"$file"'$%%
ba
:d
}'
sed -e '/^AC_CONFIG_FILES(/'"$sedprog" < "$srcdir/$configure_in" > "$srcdir/$configure_in.tmp"
if cmp -s "$srcdir/$configure_in" "$srcdir/$configure_in.tmp"; then
sed -e '/^AC_OUTPUT(/'"$sedprog" < "$srcdir/$configure_in" > "$srcdir/$configure_in.tmp"
if cmp -s "$srcdir/$configure_in" "$srcdir/$configure_in.tmp"; then
:
else
tag=AC_OUTPUT
fi
else
tag=AC_CONFIG_FILES
fi
if test -n "$tag"; then
func_modify_configure_in "($tag): Remove $file."
else
rm -f "$srcdir/$configure_in.tmp"
if test "$file" != intl/intlh.inst; then
please="$please
Please remove $file from the AC_OUTPUT or AC_CONFIG_FILES invocation
in the $configure_in file.
"
fi
fi
done
fi
sed -e 's%sed -e "/POTFILES =/r po/POTFILES" po/Makefile\.in > po/Makefile *;* *%%' < "$srcdir/$configure_in" > "$srcdir/$configure_in.tmp"
func_modify_configure_in "(AC_OUTPUT): Remove command that created po/Makefile."
sed -e '/^\(dnl \|\)AC_LINK_FILES(\$nls_cv_header_libgt, \$nls_cv_header_intl)$/d' < "$srcdir/$configure_in" > "$srcdir/$configure_in.tmp"
func_modify_configure_in "(AC_LINK_FILES): Remove invocation."
# AM_GNU_GETTEXT_VERSION may not be present, when AM_GNU_GETTEXT_REQUIRE_VERSION is used.
if grep '^AM_GNU_GETTEXT_VERSION(' "$srcdir/$configure_in" 2>&1 >/dev/null; then
sed -e 's/^AM_GNU_GETTEXT_VERSION([^()]*)/AM_GNU_GETTEXT_VERSION(['"$archive_version"'])/' < "$srcdir/$configure_in" > "$srcdir/$configure_in.tmp"
func_modify_configure_in "(AM_GNU_GETTEXT_VERSION): Bump to $archive_version."
fi
$do_changelog && func_ChangeLog_finish
# Recommend replacement for deprecated Makefile variables.
use_libtool=`cat "$srcdir/$configure_in" | grep '^A[CM]_PROG_LIBTOOL'`
for file in `(cd "$srcdir"; find . -name Makefile.am -print; find . -name Makefile.in -print) | sed -e 's,^\./,,'`; do
if test -f "$srcdir/$file"; then
if test `echo "$file" | sed -e 's,^.*/,,'` = Makefile.in && grep automake "$srcdir/$file" >/dev/null 2>&1; then
continue;
fi
# INTLLIBS is deprecated because it doesn't distinguish the two
# cases: with libtool, without libtool.
if grep '@''INTLLIBS''@' "$srcdir/$file" >/dev/null 2>&1; then
if test -n "$use_libtool"; then
please="$please
Please change $file to use @""LTLIBINTL""@ or @""LIBINTL""@ instead of
@""INTLLIBS""@. Which one, depends whether it is used with libtool or not.
@""INTLLIBS""@ will go away.
"
else
please="$please
Please change $file to use @""LIBINTL""@ instead of @""INTLLIBS""@.
@""INTLLIBS""@ will go away.
"
fi
fi
# DATADIRNAME is deprecated because we install only .gmo files nowadays,
# which can be stored in the platform independent $prefix/share hierarchy.
if grep '@''DATADIRNAME''@' "$srcdir/$file" >/dev/null 2>&1; then
please="$please
Please change $file to use the constant string \"share\" instead of
@""DATADIRNAME""@. @""DATADIRNAME""@ will go away.
"
fi
# INSTOBJEXT is deprecated because we install only .gmo files nowadays,
# no catgets .cat catalogs.
if grep '@''INSTOBJEXT''@' "$srcdir/$file" >/dev/null 2>&1; then
please="$please
Please change $file to use the constant string \".mo\" instead of
@""INSTOBJEXT""@. @""INSTOBJEXT""@ will go away.
"
fi
# GENCAT is deprecated because we install no catgets catalogs anymore.
if grep '@''GENCAT''@' "$srcdir/$file" >/dev/null 2>&1; then
please="$please
Please change $file to use the constant string \"gencat\" instead of
@""GENCAT""@. @""GENCAT""@ will go away. Maybe you don't even need it any more?
"
fi
# POSUB is deprecated because it causes "./configure --disable-nls", "make",
# "make dist" to create a buggy tarfile.
if grep '@''POSUB''@' "$srcdir/$file" >/dev/null 2>&1; then
please="$please
Please change $file to use the constant string \"po\" instead of
@""POSUB""@. @""POSUB""@ will go away.
"
fi
fi
done
# Recommend replacement for deprecated configure variables.
if grep '\$nls_cv_header_' "$srcdir/$configure_in" >/dev/null 2>&1; then
please="$please
Please stop using \$nls_cv_header_intl or \$nls_cv_header_libgt in the
$configure_in file. Both will go away. Use <libintl.h> or \"gettext.h\" instead.
"
fi
# Recommend fetching config.guess and config.sub.
if test -f "$srcdir/$auxdir"config.guess && test -f "$srcdir/$auxdir"config.sub; then
:
else
please="$please
You will also need config.guess and config.sub, which you can get from the CVS
of the 'config' project at http://savannah.gnu.org/. The commands to fetch them
are
\$ wget 'http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess'
\$ wget 'http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub'
"
fi
if $doit; then
echo "$please"
echo "You might also want to copy the convenience header file gettext.h"
echo "from the $gettext_datadir directory into your package."
echo "It is a wrapper around <libintl.h> that implements the configure --disable-nls"
echo "option."
echo
count=`echo "$please" | grep '^$' | wc -l`
count=`echo "$count" | sed -e 's/[ ]//g'`
case "$count" in
1) count="paragraph";;
2) count="two paragraphs";;
3) count="three paragraphs";;
4) count="four paragraphs";;
5) count="five paragraphs";;
*) count="$count paragraphs";;
esac
echo "Press Return to acknowledge the previous $count."
# Read from /dev/tty, not stdin, so that gettextize cannot be abused by
# non-interactive tools.
read dummy < /dev/tty
fi
exit 0
-=[ KCW uplo4d3r c0ded by cJ_n4p573r ]=-
Ⓒ2017 ҠЄГѦLѦ СүѣЄГ ЩѦГГіѺГՏ